Most people are familiar with circular sump pump lines that the majority of homes with sump pumps feature. Typically, they are not overly effective nor aesthetically pleasing. Our answer to the sump pump of the past – The Water Grabber® Bull Dog™. Your home was built level, plumb, and square – not circular. Historically, a sump pump is located on a straight wall or in a corner. Wouldn’t it make more sense to install a sump pump that emulates the features of its surroundings? One that fits snugly and attractively into a basement or crawlspace environment? The Water Grabber® Bull Dog™ sump pump system works wonders as a stand-alone unit, but in many cases, it also serves as the heart and lungs of our Water Trek Aqua Route® interior basement drainage system. When an interior basement drainage system is installed, it needs a central ejection device. In other words, a way to get the water to the outside of the home. The Water Grabber® Bull Dog™ sump pump system is just that. The unit consists of a drilled polyethylene basin with a split lid. We use 3/4″ gravel to surround the basin to help filter the water. We install our alarm, The Grabber Pal II, in the basin to alert you if the pump has a mechanical problem or is unplugged accidentally, which could cause a flood. This alarm is float activated and far superior to sensor type alarms which most companies carry. We use a special rubber fitting called “The Silencer” over or under the lid dependent on a side discharge or top discharge to hush the already quiet pump. The Water Grabber® Bull Dog™ is a revolutionary sump pump.